Miele W 5964 WP - Manual (Page 17)

4. Reminder to remove transit bars
To avoid the risk of damage, the
transit bars must be removed before
the machine is used for the first time.
See "Installation and connection" for
instructions on how to do this.
^ After removing the transit bars (if this
has not already been done by your
fitter) press the OK button.
5. Continue preparing the washing
machine for use as described in the
Operating instruction manual
An initial wash programme now has to
be carried out in order to complete the
preparation process.
^ Confirm the message by pressing the
OK button.
Your machine is now ready for the first
programme to be run.
15:00
Select programme
6. Run your first programme
The washing machine has a sensor
which measures the amount of laundry
in the drum. This determines the
amount of detergent required which
appears as a recommendation in the
display. To enable the load size sensor
to function correctly, you must first run
a Cottons 60°C programme without any
laundry and without detergent.
^ Open the stopcock.
^ Turn the programme selector to
Cottons.
Cottons
60°C 1600 rpm
Duration: 2:59 h
^ Press the Start/Stop button.
^ At the end of the programme switch
the machine off.
The washing machine is now ready for
use.
Before using for the first time
17