Miele W 5964 WP - Manual (Page 50)

One of the following fault messages appears in the display
Fault message Possible cause Remedy
1)
2
Fault
Water intake
Open stopcock
The water inlet is
blocked or
restricted. Check whether
– the stopcock is
opened properly.
– the inlet hose is kinked.
– the water pressure is
too low.
2
Fault
Check drainage
system
– The water outlet is
blocked or
restricted.
– The drain hose
has been fixed
too high.
– Clean the drain filter
and the drain pump.
– The maximum delivery
head is 1 m.
L
Waterproof system
activated
Close the stopcock
The water protection
system has reacted. – Close the stopcock.
– Call the Service
Department.
;
Technical fault xxx
Call Service
There is a fault. Start the programme
again.
If the fault message
appears again, contact
the Service Department.
1)
To switch off the fault message: Switch the machine off with the
K button.
Problem solving guide
50