Miele W 5964 WP - Manual (Page 78)

Standby display
To save energy, the display goes out
and the indicator light for the Start/
Stop button starts flashing slowly.
The display will always go out,
– if a programme is not selected within
10 minutes of the washing machine
being switched on.
– 10 minutes after the end of a
programme.
Pressing one of the buttons switches
the display back on again.
You can also choose whether you want
the display to go out 10 minutes after a
programme has started or to remain
visible throughout the programme.
On
The standby function is activated. The
display will go out 10 minutes after a
programme has started.
Not in current prog.
(the machine is delivered with this
option selected)
The standby function is deactivated.
The display will remain visible during a
programme.
Memory
If an extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.
When this programme is chosen again
these settings will appear in the
display.
The machine is delivered with the
memory function deactivated.
Anti-crease
Anti-crease helps prevent creasing
if laundry is not normally removed
immediately after the end of a
programme.
The drum will turn at intervals for up to
30 minutes after the programme has
finished. The door can be opened and
items removed at any time during the
anti-crease phase.
On
(the machine is delivered with this
option selected)
Anti-crease is activated.
Off
Anti-crease is deactivated.
Settings menu
78