Memorex MX4118 - Manual (Page 10)

9
OPERATING INSTRUCTIONS (CONTINUED)
Press the RADIO AM/FM/
POWER ON button to turn the
unit on; "AM" or "FM" and the
frequency will appear in the
display.
1
AUTOMATIC TUNING: Press
and hold the TIME/TUNING/
SKIP/SEARCH o 1 or n 2
button until the frequency in the
display starts to scan, and then
release the button; the tuner will
search and then stop on the next
strong station it finds. Repeat this
step until the desired frequency
appears in the display.
2 1
4
MANUAL TUNING: Repeatedly
press the TIME/TUNING/
SKIP/SEARCH o 1 or n 2
button to manually advance the
frequency in the display up or
down until the desired frequency
appears.
2 1
3
Press the RADIO AM/FM/
POWER ON button to select AM
or FM.
2
Press the EQ button 1 and adjust
the volume using the VOLUME +
2
or – 3 button as desired.
To turn the unit off, press the
STOP (■)/TIME SET/POWER
OFF button 3.
3
1
2
4
5
Hints for Better Reception
AM–The AM ferrite bar antenna is located inside the unit. It may be necessary to turn the unit slightly so that
the internal antenna is pointing in the direction of the AM transmitter. You may have to experiment to find the
position that provides the strongest reception for each of your favorite AM stations.
FM–Make sure that the FM Wire Antenna is extended to its full length. You may have to vary the direction of
the antenna to find the strongest signal for each FM station.
LISTENING TO THE RADIO