Memorex MX4118 - Manual (Page 15)

14
Press either the TIME/ TUNING/
SKIP/SEARCH o 1
or n 2 button
to select the next track you wish to
program. When the desired track
number appears in the display,
press the PROGRAM/MEMORY
button 3 again.
2 1
3
4
Repeat step 5 until you have
programmed up to 20 track
numbers into the CD Program
Memory. When the memory is
full, it will stay on program 20.
2 1
3
5
After programming up to 20 tracks in the CD Program Memory, press
the PLAY/PAUSE (®p)/POWER ON button 1 to begin Programmed
playback. “PROGRAM” will appear in the display and playback will
begin on the first track that you programmed. The player will continue
to play all of the tracks that you programmed in the order in which you
programmed them. When the last programmed track has been played,
the player will stop. To play back the program again, press the
PLAY/PAUSE (®p)/ POWER ON button 1.
To clear the CD Program Memory, while in the Stop mode, press the
STOP (■)/TIME SET/POWER OFF button 2 to clear the programmed
memory. Press the STOP (■)/TIME SET/POWER OFF button 2 a
third time to turn the unit off.
2
1
6
It is also possible to use the
Program and Repeat functions
together to repeat a specific
program indefinitely. First, program
the tracks in the order you wish to
hear them as described above.
The "PROGRAM" indicator will
appear in the display.
1
Press the PLAY/PAUSE (®p)/
POWER ON button 1 to begin
the Programmed playback; then
press the REPEAT/CLOCK
button 2 twice to enter the repeat
All mode; "REPEAT ALL" will
appear in the display. The player
will play the tracks you selected in
the order in which you
programmed them. When the last
track in the program has been
played, the entire program will
begin again.
2
1
2
Programmed Repeat playback
will continue indefinitely until you
press the STOP (■)/TIME SET/
POWER OFF button.
1
3
PROGRAMMED REPEAT
OPERATING INSTRUCTIONS (CONTINUED)