Memorex MX4118 - Manual (Page 9)

8
OPERATING INSTRUCTIONS
SETTING THE CLOCK
While the unit is off (the clock
appears in the display), press the
STOP (■)/TIME SET/ POWER
OFF button; the hour digit(s) will
blink in the display.
1
1
When the hour is set, press the
STOP (■)/TIME SET/POWER
OFF button again; the minute
digits will blink in the display.
1
3
To set the hour, press the TIME-/
TUNING/SKIP/SEARCH o button
1
to decrease and/or the TIME
+/ TUNING/SKIP/SEARCH n
button 2 to increase the hour.
Press and hold either button for
rapid searching.
2 1
2
To set the minute, press the
TIME -/TUNING/SKIP/SEARCH
o
button 1 to decrease and/or
the TIME +/TUNING/SKIP/
SEARCH n button 2 to increase
the minute. Press and hold either
button for rapid searching.
2 1
4
When the minute is set, press the
STOP (■)/TIME SET/POWER
OFF button again; the clock will
be set and the colon will blink.
1
5
With the power on, press the
EQ/TIMER button to cycle
through the preset EQ settings or
to turn the EQ off. Each press of
the PRESET EQ button will cycle
as follows: JAZZ, ROCK, POP,
CLASSIC, Off.
2
1
PRESET EQ
Press the PLAY/PAUSE (®p)/
POWER ON button 1 or RADIO
AM/FM/POWER ON button 2 to
turn the unit on; the display will light
brightly. Press the STOP (■)/TIME
SET/POWER OFF button 3 while
in the CD stop mode or Radio
mode to turn the unit off.
3
1
2
1
TURNING THE UNIT ON/OFF
If the unit is in CD mode, press
the RADIO AM/FM/POWER ON
button 1 to change to Radio
mode OR If the unit is in RADIO
mode, press the PLAY/PAUSE
(®p|)/POWER ON button 2 to
change to CD mode.
2
1
1
SELECTING BETWEEN CD
AND RADIO MODE