Memorex MX4118 - Manual (Page 16)

15
OPERATING INSTRUCTIONS (CONTINUED)
With the power off, press the
REPEAT/CLOCK button 1 and
then press the STOP (■)/TIME
SET/ POWER OFF button 2
within 5 seconds to enter the
Timer ON setting mode; “TIMER”
will appear and the hour will blink
on the display.
1
2
1
Press the TUNING/SKIP/
SEARCH/TIME o 1 or n 2 button
to set the timer On hour and then
press the STOP (■)/TIME SET/
POWER OFF button 3 again; the
minutes will blink.
2
3
1
4
3
Press the ALARM/MODE/MEM+
button to select the desired wake
up function (CD or RADIO). Make
sure to insert a CD or tune a
station as desired before turning
the unit off.
2
Press the TIME/TUNING/SKIP/SEARCH o 1 or n 2 button to set the
timer On minute and then press the STOP (■)/TIME SET/POWER
OFF button 3 again; the timer will then be set. When the actual time
matches the Timer’s On time, the unit will turn on to the function
selected in Step 2. To turn off the timer, press the EQ/TIMER button 4;
the unit will turn off.
2
3
1
4
4
SETTING THE TIMER
Set the timer to turn the unit on and off to the Tuner or CD mode at a preset time as follows:
TO ACTIVATE THE TIMER ON MODE, with the unit off, press the EQ/TIMER button; “TIMER” will appear in
the display next to the current time. To cancel, press the EQ/TIMER button again; “TIMER” will disappear in
the display.
NOTES:
• Before activating the timer, make sure the unit is in the Standby mode. Otherwise, there will not be sound
when the Timer’s On time is reached.
• Before activating the timer, make sure there is a disc inside the CD compartment when waking to a CD,
or make sure a AM/FM station is tuned before turning off the unit. Otherwise, there will not be sound
when the Timer’s On time is reached.
• When TIMER On time is reached, the unit will turn on for CD or Radio for 1 hour then turn off. If the CD
disc total tracks is below 1 hour, then the unit will playback all the tracks on the CD and then stop.