Mercedes-Benz 2003 S 500 - Manual (Page 144)

144
Controls in detail
Control system
Fuel consumption since last reset
̈ Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
AFTER RESET .
1 Distance driven since last reset
2 Time elapsed since last reset
3 Average fuel consumption since last re-
set
4 Average speed since last reset
Resetting fuel consumption statistics
̈ Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
̈ Press button j or k repeatedly
until you see the reading that you want
to reset in the display.
̈ Press and hold the reset button J in
the instrument cluster ( ୴ page 22) un-
til the value is reset to 0 .
i
The AFTER START display will flash until
a distance of approximately 1 mile (1.6
km) has been covered or two minutes
have elapsed since the engine was re-
started. During this period, you can in-
corporate the values for the previous
journey by pressing
J in the instru-
ment cluster.
If button J is not pressed, the AFTER
START values are set to 0.