Mercedes-Benz 2003 S 500 User Manual

Page 242

Advertising
background image

242

Controls in detail

Useful features

Information button ¡
The information button ¡ is located be-
low the center armrest cover.

̈

Press and hold the button (for longer
than 2 seconds).

A call to the Customer Assistance Cen-
ter will be initiated. The button will
flash while the call is in progress. The
message

INFO – CONNECTING CALL

will

appear in the multifunction display.

When the connection is established, the
message

INFO – CALL CONNECTED

appears

in the multifunction display. The Tele Aid
system will transmit data generating the
vehicle identification number, model, color
and location (subject to availability of cel-
lular and GPS signals).

A voice connection between the Customer
Assistance Center representative and the
occupants of the vehicle will be estab-
lished. When a voice connection is estab-
lished, the audio system mutes and the
message

TELE AID – INFO CALL ACTIVE

appears in the multifunction display. Infor-

mation regarding the operation of your ve-
hicle, the nearest Mercedes-Benz Center
or Mercedes-Benz USA products and ser-
vices is available to you.

For more details concerning the Tele Aid
system, please visit www.mbusa.com and
use your ID and password (sent to you sep-
arately) to learn more (USA only).

i

The indicator lamp in the Information
button ¡ remains illuminated in red
for approx. 10 seconds during the sys-
tem self-check after turning the
SmartKey in the starter switch to
position 2 (together with the SOS but-
ton and the Roadside Assistance
button •).
See System self-check (

page 238)

when the indicator lamp does not light
up in red or stays on longer than ap-
proximately 10 seconds.

If the indicator lamp in the Information
button ¡ is continuously illuminat-
ed and no voice connection was estab-
lished to the Response Center, then the
Tele Aid system could not initiate an In-
formation call (e.g. the relevant cellular
phone network is not available). The
message

INFO – CALL FAILED

appears

in the multifunction display.

Information calls can be terminated us-
ing the ì button on the multifunc-
tion steering wheel.

!

If the indicator lamps do not start flash-
ing after pressing one of the buttons or
remain illuminated (in red) at any time,
the Tele Aid system has detected a
fault or the service is not currently ac-
tive, and may not initiate a call. Visit
your Mercedes-Benz Center and have
the system checked or contact the Re-
sponse Center at 1-800-756-9018 (in
the USA) or 1-888-923-8367 (in Cana-
da) as soon as possible.

Advertising