Go, see “turning off engine with keyless-go – Mercedes-Benz 2003 S 500 User Manual

Page 53

Advertising
background image

53

Getting started

Parking and locking

Turning off engine with KEYLESS-GO*

̈

Place the gear selector lever in P.

̈

Press and hold the KEYLESS-GO
start/stop button until the engine
shuts off.

With the driver's door closed, the start-
er switch is now in position 1. With the
driver’s door opened, the starter switch
is set to position 0, same as SmartKey
removed from starter switch
(

page 31).

̈

Press the seat belt release button
(

page 41).

1 Lock button on the door handle

̈

After exiting the vehicle, press lock
button 1 on the door handle or on the
trunk lid.

The locking knobs on the doors move
down. The turn signal indicators light
up briefly.

For more information, see “Controls in de-
tail” (

page 85).

!

If you hear a warning signal you have ei-
ther:

ț

forgotten to turn off the lights, or

ț

not put the gear selector lever in P
before opening the driver’s door

Turn off the lights or place the gear se-
lector lever in P.

Warning!

G

To prevent possible personal injury, always
keep hands and fingers away from the door
openings when closing the doors. Be espe-
cially careful when small children are
around.

Before closing doors, make sure that there
is no possibility of someone getting caught
in a door during closing.

Warning!

G

When leaving the vehicle, always remove the
SmartKey from the starter switch, take the
KEYLESS-GO* card (if so equipped) with
you, and lock your vehicle. Do not leave chil-
dren unattended in the vehicle, or with ac-
cess to an unlocked vehicle. Unsupervised
use of vehicle equipment may cause an ac-
cident and/or serious personal injury.

Advertising