Mercedes-Benz 2003 S 500 - Manual (Page 157)

157
Controls in detail
Control system
After entering the vehicle, the steering
wheel and seat will move into the position
stored in memory when:
ț the driver’s door is closed
ț you put the SmartKey in the starter
switch
ț press the appropriate stored position
button on the memory switch
(
୴ page 117)
̈ Move the selection marker with
the æ or ç button to
the
CONVENIENCE submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
EASY-ENTRY FEATURE ACTIVATE .
The selection marker is on the current
setting.
̈ Press æ or ç to change the
easy-entry/exit setting.
The following settings are available for the
easy-entry/exit feature:
i
To cancel seat/steering wheel move-
ment, do one of the following:
ț Press seat adjustment switch
(
୴ page 35)
ț Move the steering column stalk
(
୴ page 38)
ț Press the memory switch
(
୴ page 117)
OFF The easy-entry/ex-
it feature is deacti-
vated.
STEER. COL. Only the steering
column is moved.
ST. COL + SEAT Both the steering
column and the
seat are moved.