Miele KFN 9755 iDE EN - Manual (Page 10)

Before using for the first time
If the appliance was transported or
laid horizontally for any reason, allow
it to stand vertical for at least 8 hours
before turning it on. Failure to do so
will affect the functioning of the
appliance.
Protective foil
The stainless steel trim, frames and
panels have a layer of protective foil to
prevent scratching during
transportation.
^ Carefully remove the protective foil.
Cleaning and care
^ After removing the protective foil,
treat stainless steel surfaces with the
Miele stainless steel conditioning
agent supplied with the appliance
(available to re-order from
www.mieleusa.com).
Important! Each time it is used, the
Miele stainless steel conditioning
agent forms a water and dirt
repellent protective coating.
^ Clean the inside of the appliance and
the accessories with a mild solution
of warm water and liquid dish soap,
and then dry with a soft cloth.
Turning the appliance on
With the main switch you can turn the
appliance on.
^ Press the main switch on the right
side of the control panel.
The temperature display for the
refrigerator section lights up, and the
interior lighting comes on when the
door is opened.
Bars light up in the freezer section
display until the selected temperature is
reached.
The appliance begins cooling.
Allow the appliance to run for a few
hours before placing food in it. This will
enable it to sufficiently cool.
Cool pack
Place the cool pack in the top freezer
drawer. The cool pack will be at
maximum performance after it has been
in the freezer for approx. 24 hours.
Turning the appliance off
^ Press the main switch on the right
side of the appliance until both
temperature displays go out.
If the cooling system does not turn off
the safety lock has been activated.
Before use
10