Miele KFN 9755 iDE EN - Manual (Page 48)

Removing the door damper
^ With its exterior facing downwards,
place the appliance door on a stable
surface.
^ Carefully push the tension spring a
outward with a screwdriver.
Caution! When uninstalled the door
damper will snap shut.
^ Unscrew the mounting plate b and
remove the door damper
c
downwards.
^ Loosen the ball joint d using an
open ended wrench and remove.
^ Stand the appliance doors up
individually, and loosen the hinges on
the front (hinges remain open).
^ Pull out the plugs a from the top,
middle and bottom (if the plugs are
not in the doors, the are included
separately in the packaging).
^ Remove the screws from all the
hinges
b.
^ Relocate each hinge diagonally in the
opposite corner.
Do not close the hinges.
Risk of injury!
^ To tighten the hinges, use a power
screwdriver – the screws
b are
self-tapping.
^ Use the plugs a to close the holes
on the opposite side.
Adjusting the door hinges
48