Moxa Technologies 2140 - Manual (Page 25)

Getting Started
Modem Mode
1. Click on Start Control Panel Modems.
2. If you already have a Modem, read the Setting up a new connection section below. If you
don’t have a modem, an Install New Modem message will appear. Click on Next, and the
system will detect the modem automatically. If your modem is not detected, you can select
the Modem from the manufacturers column.
Setting up a new connection.
1. After the modem is installed, open the dialup network folder in Windows to set up a new
connection.
2. Select the newly-installed Modem (for Modem connection) or Standard 33600 bps Modem
(for null modem connection), and then click on Next to continue.
3. In modem mode, enter the phone number used to connect to your VPort 2140; in null modem
mode, enter an arbitrary phone number, and then click on Next to continue.
VPort 2140 User’s Manual 2-11