Command format -5, Parameter explanations -5, Command format – Moxa Technologies 2140 User Manual
Page 67: Parameter explanations
Advanced Applications
time except for the above schedule.
Step 5: Check the option Enable the external script file to exclude the following settings to
activate the command script.
Command format
[Event][“Operator”Event]……=[Action][+Action]……;
Event
[“Digital Input Number””Digital Input State”]
[“M” “Channel Number…”]
[“Channel Number””Video Input State”]
Operator
“+”: (OR)
“*”: (AND)
Action
[(“Delay Time”)“Digital Output Number””Digital Output State”]
[“V”“Channel Number”“P”“Preset Location Number”]
[“W”{“IP”:“Port”}{“Message”}]
[“U”“Method”]
[“S”“Channel Number…”]
[“N”{“filename”}];
Parameter Explanations
Items above in brackets show the options available for that item.
“Digital input number”: 1 to 4
“Digital input state”:
H (high), L (low), / (low to high), \ (high to low)
“M”:
motion
detection
event.
“Channel Number”:
A, B, C, D for channel 1, 2, 3, 4
“Video input state”:
/ (signal from loss to presence), \ (signal from presence to loss), X (as
long as signal loss)
“Delay time”:
seconds of delay for the following actions after events happen
“Digital output number”: 1 or 2
“Digital output state”:
C (NC), O (NO)
“V”:
set video channel to go to preset location
“P”:
set
preset
location
number to go to preset location
“W”:
send
warning
to
server
“IP”:
server
IP
“Port”:
server
port
“Message”:
text to be sent to the server
“U”:
upload
snapshots
“Method”:
‘F’ is by FTP, ‘M’ is by e-mail
“S”:
take
snapshot
on
channels
“N”:
define the format of the filename
“;”:
end
of
line
The filename format is,
%a
image
characterization
(pre,
trg,
pos)
%c
video
channel
number
%y
year
%M month
%d
day
%h
hour
%m minute
VPort 2140 User’s
Manual 5-5