Multi-Tech Systems MultiFRAD FR2201 - Manual (Page 14)

14
MultiFRAD II User Guide
Introduction
This chapter will guide you through the unpacking and installation of your MultiFRAD. The installation
procedure, which is preceded by important safety warnings, provides step-by-step instructions on
cabling and powering-on the MultiFRAD. Chapter 3 provides instructions on installing and configuring
the MultiFRAD software.
Unpacking your MultiFRAD
Remove all items from the box. Your shipping box should contain the MultiFRAD, a power supply,
various cables, software and manual disks, and a MultiFRAD Model FR2201 Quick Start Guide.
Inspect all items (Figure 2-1) before proceeding with the installation. If any item appears to be
damaged, do not power up the unit; contact Multi-Tech’s Technical Support personnel for advice
(Refer to Chapter 6). If no damage is observed, configure the MultiFRAD using the information in the
rest of this chapter.
MADE IN U.S.A MADE IN U.S.A
Tech
Systems
®
Figure 2-1. Unpacking