Telnet – Multi-Tech Systems MultiFRAD FR2201 User Manual
Page 51
51
Chapter 5 - Remote Configuration and Management
7
After you have changed the configuration of the remote MultiFRAD, click the Download Setup
button to update the configuration. The remote MultiFRAD will be brought down, the new
configuration written to the unit, and the unit will reboot.
8
Click the Exit button when the downloading is complete.
9
Click the MultiFRAD Configuration icon in the Program Manager screen to verify that the
MultiFRAD is running.
Telnet
A typical Telnet client application, and typical Web-browser management of the MultiFRAD are
described in the rest of this chapter. The MultiFRAD has a built-in Telnet Server for access through
Telnet clients. A typical Telnet client is allowed to configure the MultiFRAD and its data ports. In
addition, the MultiFRAD can be remotely accessed and configured from anywhere on the Internet
through its Web interface.
The TCP/IP stack has to be loaded before the Telnet client can run and the Telnet Server option in
the MultiFRAD software has to be enabled. To access the Telnet Client, double-click the Telnet icon.
A blank Telnet screen is displayed. Click Connect and then Remote System.
When the Connect to remote host dialog box is displayed, a Host Name has to be entered. In this
example, the IP Host Name is 192.168.2.14.
Enter your MultiFRAD IP Address in the Host Name field. Click the Connect button and the
MultiFRAD Telnet Server dialog box is displayed.