Muratec MFX-1350 - Manual (Page 110)

6-7 u
sInG
f-
code features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
u
s
In
G
f
- code
box
fea
tures
Printing a list of F-code boxes
To print a list of your F-code boxes, press <Menu>, <5>, <1>, <1>, <3>, then <Enter>.
Printing a list of documents stored in your F-code boxes
To print a list of documents stored in F-code boxes, press <Menu>, <5>, <1>, <1>, <4>,
then <Enter>.
Erasing an empty F-code box
An F-code box must be empty in order to erase it. (If you select an F-code box in these
steps which is not empty, the machine beeps. If this happens, print all documents in that
box before erasing it.)
To erase an empty F-code box:
1
Press <Menu>, <3>, <4>, <2>, then <Enter>.
Select F-Code Box
01:Bulletin box 1
2
Press <q> or <p> to select the F-code box you want to erase. Then press <Enter>.
03:Erase F-Code Box
Enter I.D. Code:****
3
Use the numeric keys to enter the four-digit I.D. code.
(If you have not set the I.D. code for operation protect, you can skip this step.)
4
Press <Enter>.
The following two displays will appear alternately:
01:Erase F-Code Box
Yes  Enter
01:Erase F-Code Box
No  Cancel
5
Press <Enter> to erase the F-code box.
If you want to cancel the erasing this box, press <Cancel> and go back to step 2.
6
Press <Reset> to return to the standby mode.