Muratec MFX-1350 - Manual (Page 146)

9-11 s
ecurIty features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
s
ecur
Ity
fea
tures
Sending a fax using a department code
For this operation to work, make sure:
• The department code should be set on your machine.
• You know the department code.
1
Place your document on the ADF or document glass.
(See page 2-11 for details.)
2
Adjust the document resolution and contrast.
3
Enter the fax number by either pressing a one-touch key, entering a speed-dial num-
ber or manually dialing it.
4
Press <Start>. (If you pressed a one-touch key, no need to press <Start>.)
Enter Dept. Code
000000000
5
Use the numeric keys to enter the appropriate department code.
6
Press <Start>.
NOTE: The document glass is available only for the MFX-1350 /MFX-1330.
Making a copy using a department code
For this operation to work, make sure:
• The department code should exist on your machine
• You know the department code
1
Place your document on the ADF or document glass and adjust settings.
2
Use the numeric keys to enter the number of copies.
4
Press <Start>.
Enter Dept.Code
000000000
5
Use the numeric keys to enter the appropriate department code.
6
Press <Start>.
NOTE: The document glass is available only for the MFX-1350/MFX-1330.