Miller Electric NT 450 - Manual (Page 19)

OM-2252 Page 15
4-4. Selecting A Location
1 Lifting Eye
2 Lifting Forks
Use lifting eye or lifting forks to
move unit.
If using lifting forks, extend forks
beyond opposite side of unit.
3
Plate Label
4 Rating Label CE Models −
Typical
Use rating label to determine input
power needs.
5
Line Disconnect Device
Locate unit near correct input pow-
er supply.
! Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
5
18 in
(460 mm)
18 in
(460 mm)
OR
1
2
Movement
Location
3
4