Installation in windows 2000, Step 3: install the modem – Multi-Tech Systems MultiModem USB MT5634ZBA-USB User Manual
Page 17
17
Chapter 2 - Installation
Step 3: Install the Modem
The MT5634ZBA-USB software drivers need to be installed in your computer’s program directory.
The procedure will be different depending on the operating system. This section provides installation
procedures for Windows 2000, Windows 98, and Windows 95.
Installation in Windows 2000
1.
Power up your Windows 2000 system.
2.
If you have not already done so, connect one end of your USB cable to a USB connector on your
PC, and connect the other end to the USB connector on your modem. The Power LED on your
modem will light.
3.
Windows 2000will detect that the new modem is present and install the software drivers. Two
screens will appear during the installation process.
Screen 1
Screen 2
4.
Once Screen 2 disappears, your MT5634ZBA-USB driver software installation is complete. You
should test the operation of your new MT5634ZBA-USB by registering your MT5634ZBA-=USB
product now. Key in the URL given below and follow the on-line instructions:
http://www.multitech.com/register