Multi-Tech Systems MultiModem USB MT5634ZBA-USB - Manual (Page 44)

44
MultiModemUSB User Guide
The Modem Disconnects While Online
• If you have Call Waiting on the same phone line as your modem, it can interrupt your
connection when someone tries to call you. If you have Call Waiting, disable it before each
call. In most telephone areas in North America, you can disable Call Waiting by preceding the
telephone number with *70 (check with your local telephone company).
You can automatically disable Call Waiting by including the disabling code in the modem’s
dial prefix (e.g., ATDT*70,—note the comma, which inserts a pause before the number is
dialed). To change the dial prefix in Windows 98 HyperTerminal, select Call from the Call
menu, click Dialing Properties, check This location has Call Waiting, and select the
correct code for your phone service.
• If you have extension phones on the same line as your modem, you or someone else can
interrupt the connection by picking up another phone. If this is a frequent problem, disconnect
the extension phones before using the modem, or install another phone line especially for the
modem.
• Check for loose connections between the modem and the computer and the telephone jack.
• You might have had a poor connection because of line conditions or the problem might have
originated on the other end of the line. Try again.
• If you were online with an online service, it might have hung up on you because of lack of
activity on your part or because you exceeded your time limit for the day. Try again.
The Modem Cannot Connect When Answering
• Autoanswer might be disabled. Turn on autoanswer in your data communications program or
send the command ATS0=1 (ATS0=2 if you have Caller ID service) to make sure your
modem in terminal mode.
The Modem Doesn’t Work with Caller ID
• Caller ID information is transmitted between the first and second rings, so if autoanswer is
turned off (S0=0) or if the modem is set to answer after only one ring (S0=1), the modem will
not receive Caller ID information. Check your initialization string, and if necessary change it
to set the modem to answer after the second ring (S0=2).
• Make sure that you have Caller ID service from your telephone company.
Fax and Data Software Can’t Run at the Same Time
Communications devices can be accessed by only one application at a time. In Windows 98, you can
have data and fax communication applications open at the same time, but they cannot use the same
modem at the same time.