Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 - Manual (Page 111)

6.11 U
SING
F-
CODE FEATURES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
U
SING
F-
CODE
BOX
FEA
TURES
Sending a document with a subaddress and password
1
Switch to the Fax mode by pressing
COPY  FAX  SCAN
.
2
Place the document on the ADF or document glass.
Adjust the document mode and contrast if necessary.
3
Press
ADVANCED FUNCTIONS
until “F-Code Tx” appears on the LCD then press
ENTER
.
F-Code Tx

/

/Enter
– or –
Press the soft key which assigned “F-Code Tx”.
Enter Sub-Address
_
4
Use the numeric keys to enter the appropriate ITU-T subaddress.
Then press
ENTER
.
Enter Password
_
The password setting is optional, but required if the other party has set a password on
their F-code box.
5
Use the numeric keys to enter the ITU-T password.
Then press
ENTER
.
If you do not need to enter ITU-T password, press
ENTER
without entering any number.
Enter Fax Number
_
6
Enter the fax number.
You may use a one-touch key, speed-dial number or the numeric keys to enter the fax
number.
7
Press
START
. Your machine begins scanning the document.
== Command:01 ==
Then, your machine dials and sends the document with the subaddress and password.
To cancel the sending in progress, press
FAX CANCEL
and
CANCEL
,
CANCEL
.
To cancel the delayed sending, press
FAX CANCEL
, search the command number you
want to cancel using the cursor key, then press
CANCEL
,
CANCEL
. (See also “Reviewing
or canceling command” on page 4.8.)
NOTE: • The document glass is available only for MFX-1330 model.
• If you frequently dial the same destination with subaddress (and password), use the
macro key at your convenience. For details of the macro key, see page 8.4.