Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 - Manual (Page 88)

5.2 R
ECEIVING FAXES
Receiving a fax
Selecting the reception mode
1
Press
MENU
, 9, and then press
ENTER
four times.
The machine shows your current fax reception mode:
Fax Ready

/

/Enter
2
Press or to select your desired reception mode.
Your machine has five different reception modes:
• Tel Ready (see “Manual receive mode,” below)
• Fax Ready (see “Automatic receive mode,” below)
• Fax/Tel Ready (see next page)
• Tel/Fax Ready (see next page)
• Ans/Fax Ready (see next page)
3
Press
ENTER
to save the setting.
4
Press
RESET
to exit.
NOTE: If you assigned “Auto Rx” to the soft key (page 8.2), you can toggle Manual recep-
tion (Tel Ready) and Automatic reception (you have set) by pressing that key.
Manual reception mode
Tel Ready mode
Use it if:
• You want to use the same line for both fax and phone calls
• You receive mainly a voice call and sometimes faxes.
In this mode:
Your machine never answers calls automatically. You must answer each call as
described in “Answering calls manually” (page 5.4).
You will need to:
• Connect an external phone. (See page 1.8.)
Automatic reception mode
Fax Ready mode
Use it if:
Your machine uses its own phone line and doesn’t share it with a phone or an
answering machine.
In this mode:
Your machine answers each call and attempts to receive a fax.