Removing jammed paper from the bypass tray – Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 User Manual
Page 171
Advertising

12.13
M
AINTENANCE
& P
ROBLEM
SOLVING
1
2
3
4
5
6
7
8
9
10
11
12
A
M
AINTENANCE
& P
ROBLEM
SOL
VING
5
Close the side cover and insert the paper cassette. Lower the rear part of the cassette
to align the rear edge to the slot of the machine, then insert it completely.
Removing jammed paper from the bypass tray
If the paper is not properly fed into the machine through the bypass tray, the following
message will be displayed.
Remove Bypass Paper
Open&CloseFrontCover
1
Pull the flapper release lever and pull the paper out of the machine.
2
Open the front cover and then close it to clear the message on the LCD.
Advertising
This manual is related to the following products: