Marantz SA8004 - Manual (Page 11)

8
Getting
started
Basic connections
Basic operation
Specifi
cations
Index
Advanced connections
Advanced operations
Explanation of terms
Troubleshooting
ENGLISH
8
Getting
started
Basic operation Basic operation
Specifi
cations
Index
Advanced connections
Advanced operations
Explanation of terms
Troubleshooting
Basic connections
Basic operation
This chapter explains the procedures required to playback a CD,
and the various operations that can be performed during CD
playback.
For other operations, see the sections below.
n Playback of MP3 and WMA fi les (vpage 14)
n Playback iPod® (vpage 16)
n Playing a USB memory device (vpage 17)
n Using as a D/A converter (vpage 18)
n Performing menu settings (vpage 19)
Before use
Switching the sound mode (Playback la yer)
Some super audio CD discs have 2 layers. Before playback, perform
the operation below to select the playback layer.
For details on the super audio CD, see “Super audio CD” (vpage 23).
The sound mode can also be set using “SA-CD (Switching sound
mode)” (vpage 20) in the setting menu.
1 Turn the power on.
(Press
<ON/STANDBY> .)
2
Press <DISC / INPUT> or [DISC] to set the playback
media mode to “DISC”.
3 Insert a disc.
Press 5 to open and close the disc tray.
4
Press [S.MODE] and switch to the layer you want to
set (Super Audio CD only).
SA-CD CD
[Selectable items]
SA-CD : Plays back the 2-channel area of the Super Audio CD
(the default setting).
CD : Plays back the CD layer of the Super Audio CD.
• If a disc that does not contain the layer set for top priority playback
is loaded, the contents recorded on another layer are displayed
automatically.
If a layer in which nothing is recorded is selected, the other layer that
exists on the disc is played back automatically.
NOTE
Sound mode cannot be changed for discs with only a Super Audio
CD area.
Turning the power off
Press <ON/STANDBY> or [POWER] .
Power is set to standby and the power indicator lights.
Before setting power to standby, make sure the disc tray is completely
closed.
NOTE
• Do not force the tray in by hand while power is set to standby. This
could cause a trouble.
• Even when power is set to standby, electrical current passes through
some circuits. If you do not intend to use the unit for an extended
period of time, unplug the power cord from the household power
outlet.
Before use
Button located on both the main unit and
the remote control
BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control [BUTTON]
Symbols used to indicate buttons in this manual
<ON/STANDBY>
5
<DISC/INPUT>
Disc tray
Power
indicator
[DISC]
[S.MODE]
[POWER]