MACKIE Digital Mixers - Manual (Page 9)

9
User’s Guide
Removing the Plug-in
1. Select none from the associated Plugin
drop-down assignment menu.
2. Click OK in the Alert dialog box.
Note: Note: Note: Note: Note: A plug-in can also be deleted
from the Setup section on the console.
Assign an Input Source to the Plug-in
• Click the plug-in’s INPUT button to select an input
source. In the example below, we have chosen the Aux
5
Bus as the input to the plug-in installed in slot 5.
When a plug-in is fed from
an aux bus, its output
appears on the FX Return
channels (faders in the
EFFECTS bank). The return
channel is determined by
the slot number and
whether the effect output is
mono or stereo. For
example, a reverb with a
mono input and stereo
output that is installed in
Slot 5 has its outputs on FX
5 and FX 6. Note: the
default state for all FX
channels is MUTE. You
won’t hear the effect until you unmute its FX
return channel(s).
A plug-in can also receive its input from a
channel pre- or post-DSP insert or the main
stereo left and right bus. When a plug-in is inserted “in line” in
this manner, its output is routed directly back into the channel.
See FX Routing on page 27 for more details.