Multi-Tech Systems MTCBA-G-F2 - Manual (Page 26)

Getting Started
26
For example, one might use two 6-32 self-
tapping screws 5/8” in length to mount the
unit in a truck to the wall of the cab behind the
passenger’s seat.
2. Typically, the unit is mounted against a flat
surface into which holes can be drilled. The
mounting holes (center-to-center) must be
separated by 125mm or 4 -15/16 inches.
Screw Separation
= 125 mm
or 4 15
16
inches
Drill the mounting holes at the desired
mounting location (if applicable).