Servicing the lenticular screen and fresnel lens – MITSUBISHI ELECTRIC V29 User Manual
Page 36
Page 36
MODELS: WD-52627 / 52628 / 62627 / 62628 / 62827 / 62927 / 73727 / 73827 / 73927
SERVICING THE LENTICULAR SCREEN AND FRESNEL LENS
Lenticular Screen and Fresnel Lens Installation
Note: Store the Lenticular Screen and Fresnel Lens in a cool dry place. High humidity may
deform the Lenticular Screen and Fresnel Lens.
1.
Apply double coated tape (Part #LENS-TAPE) along the top rear edge of the Lenticular Screen, as shown
below. Refer to the table below for the tape length.
2.
Sandwich the Fresnal Lens and Lenticular Screen together. The Lenticular Screen label must be towards
the front and the Fresnel Lens label towards the rear. (Figure 2)
3.
Apply pressure at the top edge to bond the screens together.
4.
Reverse the Screen Removal procedure and insert the screens in the Screen Fame Assembly.
Figure 1