Cabinet disassembly – MITSUBISHI ELECTRIC V29 User Manual
Page 7
MODELS: WD-52627 / 52628 / 62627 / 62628 / 62827 / 62927 / 73727 / 73827 / 73927
Page 7
SPEAKER GRILLE & BEZEL Removal
1)
Pull the SPEAKER-GRILLE away from the cabinet to remove.
2)
Pull the BEZEL from the cabinet.
SCREEN-ASSY Removal
1)
Remove 10 screws (a) from the upper cabinet rear cover (3 screws on each side and 4 screws across the
top).
2)
Remove screws (b) along the bottom of the SCREEN-ASSY (8 screws on 52 inch models, and 10 screws
on 62 inch models),
3)
Unplug the LL connector to the front CONTROL-PANEL.
4)
Lift the SCREEN-ASSY up slightly and then pull away from the cabinet.
CABINET FRONT DISASSEMBLY
(WD-52627 / WD-52628 / WD-62627 / WD-62628)
CARD READER Removal
1)
Remove two screws (c) securing the Card
Reader.
2)
Pull the Card Reader from the cabinet.
3)
Disconnect the ground lead, USB and 1394
connectors to the Card Reader.