MITSUBISHI ELECTRIC V29 - Manual (Page 9)

MODELS: WD-52627 / 52628 / 62627 / 62628 / 62827 / 62927 / 73727 / 73827 / 73927
Page 9
SIDE-TRIM Removal
1) Remove screws (a) and (b) on each
side of the unit.
2) Pull off the SIDE-TRIM on each side.
BEZEL and Card Reader/Contol Assy. Removal
1) Remove screws (c) to remove the BEZEL.
2) Remove screws (d), pull the Card Reader/
Control Assy. out the front of the unit.
3) Unplug the LL, CE1, J8202 and 1394
connectors to remove the Assembly completely.
WD-62827 Front Disassembly (continued)