Metrologic Instruments MS6720 - Manual (Page 27)

21
S CAN P ATTERN S PECIFICATIONS
Projection Axis
The scan pattern of the MS6720 exits straight out of the scanner. This
feature was purposefully designed to provide pointing efficiency in the
hand held mode and instinctive positioning in the fixed presentation mode.
Omnidirectional Scan Volume
Note: The above scan volume shows omnidirectional volume. This
volume does not reflect the entire length of all the laser lines.
(Please refer to the cross-sectional Pattern on, page 22)
Hand-Held Mode Fixed Presentation Mode
A
B
A. 2.00” [50.8mm] Dia at 0” [0mm] From Face
B. 3.50” [88.9mm] Dia at 4.00” [101.60mm] From Face
C. 4.66” [118.4mm] Dia at 8.00” [203.2mm] From Face
A
B C
C