Martin Audio WLX - Manual (Page 33)

The following delay line taps would be required for the above system:
t0 = 0ms
t1 = 0.83mS
t2 = 1.66mS
t3 = 2.49mS
t4 = 3.32mS
t5 = 4.15mS
t6 = 4.98mS
Going further
It is possible to apply electronic shaping to horizontal arrays. For instance, it is common to use curved main
clusters for smooth mid and high frequency coverage. Ground-based subwoofer arrays should follow the
same curvature to maintain mid-bass crossover coherence but this is often difficult due to flat-fronted stage
structures.
The following illustration shows an example of a flat-fronted horizontal array electronically splayed to
emulate the grey-out example shown.
All material © 2007. Martin Audio Ltd. Subject to change without notice.