Martin Audio WLX - Manual (Page 7)

W8LM presets include the WLX sub-woofer so they have two (mono) or four (stereo) unlocked delays. The
WLX channel defaults to zero because the WLX has the longest horn. The W8LM LF/Full-range and HF
reference delays default to 3.931mS and 3.829mS respectively to time align the W8LM to the WLX when the
grilles are aligned.
W8L, W8LC & W8LM reference delays and Sub-woofer delays are left unlocked to allow users to align
main systems and sub-woofers if placement causes misalignment. The “Lock Linking”, mentioned above,
ensures that all the drivers in a cabinet track the reference delay and maintain the correct inter-driver
alignment.
Standard reference delay channels are as follows:
W8L Series Reference delay channels (left
unlocked for
main-to-subwoofers
alignment)
Functions
W8L 1 LF
W8LC 1 LF
W8LM (Active mono) 1
4 WLX
Lower HF
W8LM (Passive mono) 1
2 WLX
Lower full-range
W8LM (Active stereo) 1
3
4
6 Left WLX
Left HF
Right WLX
Right HF
W8LM (Passive stereo) 1
2
4
5 Left WLX
Lower left full-range
Right WLX
Lower right full-range
Alternative W8LM + WLX presets are now available. These provide a separate sub-woofer signal
chain via controller input B and output 6. Reference delays for these main+sub input set-ups are as
follows:
W8LM + WLX Reference delay channels (left
unlocked for
main-to-subwoofers
alignment)
Functions
4W8LM + WLX
(Active mono - configured upper
& lower for possible flown +
stacked use)
6/8/12W8LM + WLX
(Active mono)
6
3
4
6
4
WLX
Lower HF
Upper HF
WLX
Lower HF
All material © 2007. Martin Audio Ltd. Subject to change without notice.