Miele PW 6065 - Manual (Page 11)

The appliance must be correctly
installed and connected before the
first use. Please see the "Installation
instructions."
For safety reasons, it is not possible to
run a spin cycle before the first use. A
program must be run
without laundry
and detergent to flush out any residual
water from the factory testing process.
^ Open the water mains.
Welcome screen
The Welcome screen shows when the
washer is turned on for the first time.
M
PROFESSIONAL
Welcome!
The welcome screen will not show
anymore, when the total wash time of
the washer exceeds one hour.
The display then shows the language
selection.
Language J
^ Select the desired language and
confirm with "OK".
Shipping struts
The display reminds the user to remove
the shipping struts.
^ If the shipping struts were already
removed, confirm with the G
button. Otherwise remove them at
this time then confirm.
Set the time of day
^ Set the hour by turning the jog shuttle
and press to confirm.
^ Repeat to set the minutes and
confirm. Press again to save the time
of day.
Basic menu "Cottons Uni." shows
^ Press the flashing button "Start".
The drum door must be closed.
Once the program ends the washer can
be used for laundry.
Before using for the first time
11