Miele PW 6065 - Manual (Page 48)

Washer/ Dryer Stack
Height:
Stacking kit with pull out shelf
66
15
/
16
" (1700 mm)
The Miele washing machine can be
installed as part of a washer-dryer
stack in combination with a Miele
tumble dryer. An appropriate stacking
kit* is required.
Installation of the stacking kit must be
performed by a Miele Service
Technician.
Reinstallation of the machine lid
When reinstalling the appliance lid,
check the firm fit of the cover at the rear
bracket for a safe transport of the dryer.
Installation on a base
The machine can be installed on an
open or closed steel base, or on a
concrete base. Concrete is
recommended.
^ Secure the two front feet of the
washer with the supplied retaining
clips when installing on a concrete
base.
^ Read the supplied Installation
manual.
Coin mechanism
The dryer can be equipped with a coin
mechanism*.
The reprogramming necessary for the
coin mechanism must be done by a
Miele Service Technician.
Empty the coin mechanism regularly.
Coins or tokens may get jammed.
Do not install devices to auto-
matically turn the washer off, e.g. a
clock timer.
* Available from your Miele dealer or
Miele.
Installation
48