Miele PW 6065 - Manual (Page 24)

Spin speed
Program rpm
Cottons Hygiene 1400
Cottons Uni. 1400
Minimum iron 1000
Delicates 600
Sturdy 1200
Woollens 1200
Silk 400
Shirts 600
Denim 900
Disinfection programs* 1400
Kitchen linen* 1400
Table linen* 1200
Curtains* 400
Pillows* 1400
Outerwear* 900
Proofing* 800
Towelling 1400
Sluice* 1400
Spin 1400
* = Programs can be added from the "Settings -
Supervisor level" when activated by the Technical
Service.
The final spin speed can be reduced.
The speeds above are the highest
available.
Rinse spin
The laundry is spun after the main wash
and between the rinse cycles.
Reducing the final spin speed will also
reduce the rinse spin speeds.
Without final spin
^ Select "Rinse Stop" from the
sub-menu "Extras". The laundry is not
spun and remains soaking in water.
This will prevent wrinkles if the
laundry is not removed immediately
at the end of the wash program.
– Selecting the final spin
The washer is set default to the
maximum spin speed of the wash
program. You can select a lower spin
speed. Press "Start" to start the final
spin.
– To finish the program
Press the a button. The water will
be drained. Press the a door
button to open the door.
Deselect rinse spin and final spin
^ Select "Without spin". The laundry is
not spun after the final rinse but the
water is drained away. After the drain
cycle the washer goes immediately
into the anti-crease cycle.
Spin
24