Miller Electric MC-80M User Manual
Owner’s manual, Mc-80 and mc-80m
cover 5/94 – Ref. ST-800 895
PRINTED IN USA
1995 MILLER Electric Mfg. Co.
Air-Cooled Plasma Arc Cutting (PAC) Torches
Can Be Used For Plasma Arc Gouging (PAG)
80 Amperes, 120 Volts DC At 100% Duty Cycle
Safety Interlock Devices Shut Down Power Source
Hand-Held Torch Equipped With Either 25 Or 50 ft (7.6 Or 15.2 m) Cable
Machine-Held Torch Equipped With 50 ft (15.2 m) Cable
Fully Assembled And Supplied With Consumable Kit
Read and follow these instructions and all
safety blocks carefully.
Have only trained and qualified persons
install, operate, or service this unit.
Call your distributor if you do not understand
the directions.
Give this manual to the operator.
For help, call your distributor
or: MILLER Electric Mfg. Co., P.O. Box 1079,
Appleton, WI 54912 414-734-9821
OWNER’S
MANUAL
May 1995
Form:
OM-1592A
MC-80 And MC-80M