Marantz PD4293D - Manual (Page 45)

38
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
The color system is set to “3.58 NTSC”.
Information
Ⅵ Video signal formats
Different countries use different formats for video
signals. Set to the format used in your current country.
AUTO1/2 ......... The video signals are automatically
detected and the format is set
accordingly.
AUTO1: 3.58NTSC, 4.43NTSC, PAL, SECAM,
PAL60
AUTO2: PAL-M, PAL-N, 3.58NTSC
PAL (B, G) ....... This is the standard format used
mainly in the United Kingdom and
Germany.
SECAM ............. This is the standard format used
mainly in France and Russia.
4.43 NTSC,
PAL60 .............. This format is used for videos in
countries using PAL and SECAM
video signals.
3.58 NTSC ...... This is the standard format used
mainly in Japan and the United States.
PAL-M ............. This is the standard format used
mainly in Brazil.
PAL-N .............. This is the standard format used
mainly in Argentina.
Setting the video signal format
Use these operations to set the video signal format.
Example: Setting the video signal format to “3.58
NTSC”
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the
▲ and ▼ buttons to select “INFORMATION”,
then press the PROCEED button.
The “INFORMATION” screen appears.
2. Use the
▲ and ▼ buttons to select “COLOR SYSTEM”,
then press the PROCEED button.
I N F O R M AT I O N
RETURN EXIT
FREQUENCY
LANGUAGE
COLOR SYSTEM
SEL. OK PROCEED
The “COLOR SYSTEM” screen appears.
C O L O R S Y S T E M
RETURN EXIT
: AUTO1
ADJ.
COLOR SYSTEM
3. To select “3.58 NTSC” ...
Use the ᮤ and ᮣ buttons to select “3.58 NTSC”.
The mode switches as follows when the ᮤ and ᮣ
buttons are pressed:
→ AUTO1 ↔ AUTO2 ↔ 3.58NTSC ↔ 4.43NTSC ←
→ SECAM ↔ PAL-M ↔ PAL-N ↔ PAL60 ↔ PAL ←
C O L O R S Y S T E M
RETURN EXIT
: 3.58NTSC
ADJ.
COLOR SYSTEM