Minicom Advanced Systems Smart IP Extender User Manual
Smart ip extender user guide
Advertising
International HQ
Jerusalem, Israel
Tel: + 972 2 535 9666
[email protected]
North American HQ
Linden, New Jersey
Tel: + 1 908 4862100
[email protected]
European HQ
Dübendorf, Switzerland
Tel: + 41 1 823 8000
[email protected]
Italy
Rome
Tel: + 39 06 8209 7902
[email protected]
www.minicom.com
Customer support - [email protected]
5UM20104 V2.3 9/04
Smart IP Extender
User Guide
Advertising
Table of contents
Document Outline
- Smart IP Extender User Guide
- Table of Contents
- Welcome
- Introduction
- Features of IP Extender
- Remote power management
- System components
- The IP Extender cables
- IP Extender front panel
- The IP Extender rear panel ports
- Pre-installation instructions
- Connecting the IP Extender to the host computer/KVM switch
- Connecting the Power management options
- Connecting the IPMI option
- Connecting the External Reset/Power Option
- Connecting to Ethernet
- 10 Mbps Connection
- 100 Mbps Connection
- Switching on
- Configuring the system
- Configuration via DHCP server
- Configuration via local console
- Mouse, Keyboard and Video configuration
- IP Extender Video Modes
- Operating the IP Extender system
- Logging in
- Timeout
- The Work area
- Remote Console
- Keyboard layout
- The Control buttons /toolbar icons
- The Chat window
- The Video settings
- Video Settings access
- Mouse synchronization
- Mouse synchronization limitations
- Single mouse mode
- Remote Console Settings
- Telnet Console
- Status via IPMI
- Event Log via IPMI
- Power Control
- Keyboard & Mouse Settings
- KVM Settings
- KVM Port Settings
- Video Settings
- Enable local video port
- Noise filter
- Video quality/speed
- Custom Video Modes
- User/Group Management
- Existing user
- New user name
- Full user name
- Password / Confirm password
- Email address /Mobile number
- Group membership/Member of/Not Member of
- Existing groups
- New group name
- Create User button
- Delete User button
- Modify User button
- Copy User
- Group Management
- Create group button
- Delete Group button
- Modify Group
- Copy Group
- User/Group Permissions
- Network Settings
- Dynamic DNS
- Modem Settings
- Serial Port Settings
- Security Settings
- SNMP Settings
- The IP Extender SNMP MIB
- IPMI Settings
- LDAP Settings
- Maintenance
- Updating firmware
- Direct SmartIP Links
- Data file for support
- Include/modify custom HTML code
- Access via Telnet
- Telnet server commands
- Frequently Asked Questions
- Glossary of terms
- Appendix A: IP Extender Video modes
- Appendix B: Key codes
- Appendix C: Pin assignments
- Appendix D: Technical specifications