Minicom Advanced Systems Smart IP Extender - Manual (Page 46)

SMART IP EXTENDER
45
Intelligent Power Module - External module option to switch power of a single
system by putting it in the power supply line of the controlled system.
ePowerSwitch 4 port- Using this switch, switch power for more than one system
connected to IP Extender through a KVM switch.
ePowerSwitch-Slave – This switch is cascadable to up to 4 power sockets with 8
ports. IP Extender must be connected to the first socket of the cascade via a serial
connection.
Spectrum Control Inc. - Smart Start Jr. – Check the box if this option is connected.
72. Security Settings
From the IP Extender Menu choose Security Settings. The Security Settings appears.
See Figure 30.
Figure 30 Security Settings
SSL settings
Force HTTPS - Access the Web front-end only using an HTTPS connection. IP
Extender won't listen on the HTTP port for incoming connections.
Disable SSLv2 ciphers – disables SSLv2 ciphers. Only version 3 or higher is
enabled.
KVM encryption - Controls the encrypting of the RFB protocol, used by the
Remote Console to transmit the screen data to the administrator machine and
keyboard and mouse data back to the host.
Off - No encrypting used.
Try - Tries to make an encrypted connection. If unsuccessful, an unencrypted
connection is used.