MediSense PCx - Manual (Page 54)

The Proficiency Test menu enables the operator to perform unknown
sample test challenges if required by facility policy.
Use the following procedures to perform a proficiency test.
If the monitor displays a message not indicated in these procedures,
please refer to section 10, Troubleshooting.
6-1
Questions? Refer to Page 10-13 For Customer Care Information.
Proficiency Test
6
What You See
on the Display
What You Do Comments
1. Press the On/Off
button to turn on
the monitor.
The Abbott logo screen
appears for a few seconds,
followed by the product
name, the software
version screen, then the
Test Mode menu.
2. Press Menu. The Menu Mode screen
now appears.
3. Press 2 – Proficiency
Test.
The monitor will prompt
for the Operator ID to be
scanned or entered.
4. Scan or manually enter
the Operator ID via the
keypad, then press
Enter.
The monitor will prompt
for the Sample ID to be
scanned or entered.
5. Scan or manually enter
the Sample ID via the
keypad, then press
Enter.
The monitor will prompt
for the Strip Lot number
to be scanned or entered.