Mercedes-Benz 2006 C-Class User Manual

Page 152

Advertising
background image

151

Controls in detail

Control system

̈

Press button

j or k repeatedly

until the message

Surround lighting

appears in the multifunction display.

The selection marker is on the current
setting.

̈

Press button

æ or ç to switch

the locator lighting function

On

.

̈

Turn the exterior lamp switch to
position

U when exiting the vehicle

(

page 118).

The locator lighting feature is
activated.

Set night security illumination
(Headlamps delayed shut-off)

Use this function to set whether or not the
exterior lamps illuminate during darkness
after exiting the vehicle and all doors
closed.

With the delayed shut-off feature activated
and the exterior lamp switch in
position

U before the engine is turned

off, the following lamps will switch on
when the engine is turned off and remain
lit for appriximately 15 seconds:

ț

Parking lamps

ț

Tail lamps

ț

License plate lamps

ț

Side marker lamps

ț

Front fog lamps

If after turning off the engine you do not
open a door or do not close an opened
door, the lamps will automatically switch
off after 60 seconds.

̈

Move the selection marker with
button

æ or ç to the

Lighting

submenu.

̈

Press button

j or k repeatedly

until the message

Hdlamp delay off

appears in the multifunction display.

The selection marker is on the current
setting.

i

You can reactivate this function within
10 minutes by opening a door.

୴୴

Advertising