Mercedes-Benz 2006 C-Class - Manual (Page 402)

401
Practical hints
Replacing bulbs
Low beam bulb
̈ Press the clamp on housing cover 1
and remove it.
̈ Pull the electrical connector off.
̈ Turn bulb socket 4 counterclockwise
and take out the bulb.
̈ Insert the new bulb so that its socket
locates in the recess of the lamp
housing.
̈ Turn bulb socket 4 clockwise until it
engages.
̈ Plug the electrical connector onto the
bulb.
̈ Align housing cover 1 and press until
it engages.
High beam bulb
̈ Press the clamp on housing cover 2
and remove it.
̈ Pull the electrical connector off.
̈ Turn bulb socket 5 counterclockwise
and take out the bulb.
̈ Insert the new bulb so that its socket
locates in the recess of the lamp
housing.
̈ Turn bulb socket 5 clockwise until it
engages.
̈ Plug the electrical connector onto the
bulb.
̈ Align housing cover 2 and press until
it engages.
Front turn signal lamp bulb
̈ Turn bulb socket 3 with the bulb
counterclockwise and remove it.
̈ Press gently onto the bulb and turn it
counterclockwise out of bulb
socket
3.
̈ Press new bulb gently into bulb
socket
3 and turn clockwise until it
engages.
̈ Place bulb socket 3 back into the
lamp and turn it clockwise.
Parking and standing lamp bulb
̈ Press the clamp on housing cover 2
and remove it.
̈ Pull out bulb socket 6 with the bulb.
̈ Pull the bulb out of bulb socket 6.
̈ Press the new bulb into bulb socket 6.
̈ Press bulb socket 6 back into the
lamp.
̈ Align housing cover 2 and press until
it engages.