Mercedes-Benz 2006 C-Class User Manual

Page 268

Advertising
background image

267

Controls in detail

Useful features

Emergency calls

An emergency call is initiated automatical-
ly following an accident in which the emer-
gency tensioning devices (ETDs) or
air bags deploy.

An emergency call can also be initiated
manually by opening the cover next to the
interior rear view mirror labeled SOS, then
briefly pressing the button located under
the cover. See (

page 268) for

instructions on initiating an emergency call
manually.

Once the emergency call is in progress, the
indicator lamp on the SOS button will
begin to flash. The message

Connecting Call

appears in the multifunc-

tion display. When the connection is estab-
lished, the message

Call connected

appears in the multifunction display. All in-
formation relevant to the emergency, such
as the location of the vehicle (determined
by the GPS satellite location system), vehi-
cle model, identification number and color
are generated.

A voice connection between the Response
Center and the occupants of the vehicle
will be established automatically soon af-
ter the emergency call has been initiated.
The Response Center will attempt to
determine more precisely the nature of the
accident provided they can speak to an
occupant of the vehicle.

The Tele Aid system is available if

ț

it has been activated and is operation-
al. Activation requires a subscription
for monitoring services, connection
and cellular air time

ț

the relevant cellular phone network
and GPS signals are available and pass
the information on to the response cen-
ter

i

Location of the vehicle on a map is only
possible if the vehicle is able to receive
signals from the GPS satellite network
and pass the information on to the
Response Center.

Warning!

G

If the indicator lamp in the SOS button is

flashing continuously and there was no

voice connection to the Response Center

established, then the Tele Aid system could

not initiate an emergency call (e.g. the rele-

vant cellular phone network is not available).

The message

Call failed appears in the

multifunction display for approximately

10 seconds.

Should this occur, assistance must be sum-

moned by other means.

Advertising