Mark Levinson 532 - Manual (Page 20)

16
Mark Levinson
4. Click the Properties button to open the Local Area Connection
Properties menu.
Note
If the computer is not currently connected to an active network, Step 3
has already opened the Local Area Connection Properties menu.
5. Click on the Internet Protocol (TCP/IP) line item so that it is
highlighted.
6. Click the Properties button.
7. Select the “Use the following IP address” option. The IP address,
Subnet mask, and Default gateway boxes are no longer grayed
out and can now be modified.
8. Enter the following values:
• IP address: 192.168.50.x
where x stands for a number other than 3
• Subnet mask: 255.255.255.0
• Do not enter a value in the Default gateway parameter.
Note 192.168.50.3 is the default Static IP address for the Nº532. The
computer must be on the same subnet and have a unique address.
9. Click “OK” to save and exit the menu.
10. Open the Internet Explorer Web browser.
11. From the menu bar, select the Tools Internet Options menu.
12. Select the Connections tab.
13. Click the LAN Settings button.
14. Verify that “Use a proxy server for your LAN” is NOT checked.
15. Click “OK” to save and exit the program.
Network Setup for Windows 2000
1. From the Start menu, select Settings Control Panel.
2. Double-click on the Network and Dial-Up Connections option.
3. Double-click on the Local Area Connection option.