Specifications – Mark Levinson 532 User Manual
Page 31
27
Nº532 Power Amplifier
Specifications
All specifications are subject to change without notice.
Input & Output Connectors
•
two balanced XLR inputs
•
two unbalanced RCA inputs
•
two “Hurricane” loudspeaker outputs with banana-plug sockets
(banana-plug socket not available on the 230 VAC models)
Control Connectors
•
two Link2 ports
•
one Ethernet port
•
one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc
•
one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc
•
3-pin IEC standard power connector
Rated Output Power
20Hz to 20kHz at <0.5% THD, 400W per channel @ 8 Ω,
full output from 2.59Vrms
Frequency Response
within 0.1dB from 10Hz to 20kHz
Signal-to-Noise Ratio
>85dB, reference level: 2.83 Vrms
Input Impedance
100 kΩ (balanced); 50 kΩ (unbalanced)
Voltage Gain
26.8dB
Input Sensitivity
2.83Vrms output at 130mVrms input
Output Impedance
<20 mΩ, 20Hz to 20kHz
Power Requirements
100V∼, 120V∼, 230V∼, 800W, factory set for destination country
Dimensions
•
Height (with feet): 9.55 in (242.57mm)
•
Height (without feet): 8.75 in (225.25mm)
•
Width: 17.5 in (444.50mm)
•
Depth: 21.1 in (535.85mm)
Weight
•
Net weight: 121.5 lbs (55.22kg)
•
Shipping weight: 129.5 lbs (58.86kg)
Operating Environment
•
Operating temperature: 0
o
to 35
o
C (32
o
to 95
o
F)
•
Storage temperature: –30
o
to 75
o
C (–22
o
to 167
o
F)
•
Relative humidity: 95% maximum without condensation