MGE UPS Systems 66074 - Manual (Page 28)

www.mgeups.com
Network
Management Cards
User Manual
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card – User Manual 34003676EN/GA Page 28/69
3.4.2 Email Message Settings
This page enables customisation of the content of the messages received by recipients of e-mails sent by
the card.
Customisation is common to the four recipients that can be notified (see
E-mail notification ).
Z Sender
(32 characters maximum) identifies the source of the message. The default value is [email protected].
This field is free. However, depending on the type of SMTP server configuration, it is possible that the
server checks that the domain name contained in the From address exists, and even that the user in the
From address belongs to this domain.
Z Subject
enables the user to specify the subject of the e-mail to be sent. By entering some free text and selecting
from several optional fields, if desired, the message subject is built:
- UPS name recalls the name of the UPS, can be selected or not.
– UPS location recalls the geographic location of the UPS (see System Settings), can be selected or not.
– Event message identifies the event generating the e-mail, can be selected or not.
- Message text is a free zone.
The body of the e-mail sent is composed of:
- Message text, which is free text.
- the date and time of the event, as saved in the log.
- URL of the card, enabling a direct link with the card to be established.
– Attachments, as configured for the e-mail recipients .- duplication of the subject, as configured.