MGE UPS Systems 66074 - Manual (Page 40)

www.mgeups.com
Network
Management Cards
User Manual
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card – User Manual 34003676EN/GA Page 40/69
3.5.6 Time
Click the “Time” section in the menu.
This menu enables initialisation of the date and time of the card in three different ways.
Z Synchronise manually: Enables initialisation of the date and time of the card, with the values entered in
the Date and Time fields. Values are updated after clicking the “Save” button.
Z Synchronise with computer time: Enables the date and time of your PC to be transferred to the card. This
transfer is made after clicking on the “Save” button. Time is not adjusted regularly, it is set one time after
clicking the “Save” button.
Z Synchronise with an NTP server: Enables connection with a time server, either available on the
company’s internal network or on the Web. This server communicates GMT time. The IP address of the
time server must be entered, and the time zone of your geographic area must then be selected from the
list. Connection is made with the server and the date and time are set after clicking on the “Save” button.
Time is updated every hour.