Multi-Tech Systems MT5600ZDX - Manual (Page 39)

39
Owner’s Manual
Command: +MS Select Modulation
Values:
Default: n/a
Description: +MS= This extended-format command selects the modula-
tion, optionally enables or disables automode, and
optionally specifies the lowest and highest connec-
tion rates using one to four subparameters (client
modem) or five subparameters (server modem).
The command format is:
+MS=<mod>[,[<automode>][,[<min_rate>][,[<max_rate][,[<x_law][,[<rb_signalling>]]]]]]<cr>
The modem can send a string of information to the
DTE consisting of selected options when AT+MS?<cr>
is entered. The following table is a display of
subparameter definitions:
*: Use a comma (,) to separate optional parameters. For example:
+MS=11, 1, 300, 28800 (+MS command with the default settings).
Subparameters that you do not enter remain at their current value. Type a
comma only to skip a subparameter or carriage return to skip the last
subparameter. For example, +MS=,0,<Enter> disables auto mode and
keeps all other settings at their current value.